What are the precautions for loading and unloading robots?

　　The loading and unloading manipulators connect multiple punching machines and hydraulic presses, reducing the investment in continuous stamping and investment in high-speed punching machines, and achieving automated continuous production with common equipment and molds. The loading and unloading robot can be connected with the automatic material feeding system; the X-axis robot is driven by a servo motor, the Z-axis is driven by a stepping motor, and the speed is high-speed stable; the material can be vacuum-absorbed and electromagnetically sucked; of course, the others can be customized.

　　1. Before operating the loading and unloading robot equipment, be sure to check whether there is water or oil in the electrical control box. If the appliance is damp, do not turn on the equipment, and always check whether the power supply voltage is in compliance with the equipment operation and whether the line is normal.

　　2. Verify that the direction of rotation of the motor is the same, then turn on the power.

　　3. When the industrial robot needs to be dismantled, turn off the power of the injection machine, turn off the power supply of the robot, and turn off the air pressure source of the robot;

　　4. Loosen the cylinder fixing plate fixing screw and move the arm to move the buffer seat to the arm.

　　When paying attention to whether the loading and unloading robot equipment is running normally, pay attention to the problems on the hardware of the equipment. More attention should be paid to the proper supervision of the operation. In many cases, the operation of the operating equipment is often caused by improper operation of the equipment. Damage and injury, double-layer supervision and inspection on software and hardware, in order to get a lot of equipment operation in production, thereby increasing production efficiency and service life.